0 Replies Latest reply on May 2, 2016 10:03 AM by chvgms

    MWG HA

    chvgms

      Hi,

       

      I have implemeneted HA between 2*4500C appliances. Though it is working as expected, but when i execute "ip addr show" i am not getting the expected result. Ideally we should see "secondary <interface> " in the command output on the director node, but i dont see that. what could be the reason?

       

      [root@PROXY01 ~]# ip addr show

      1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

          link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

          inet 127.0.0.1/8 scope host lo

          inet6 ::1/128 scope host

             valid_lft forever preferred_lft forever

      2: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000

          link/ether 68:05:ca:38:5a:f8 brd ff:ff:ff:ff:ff:ff

          inet 192.168.0.1/24 brd 192.168.0.255 scope global eth2

      3: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

          link/ether 68:05:ca:38:5a:f9 brd ff:ff:ff:ff:ff:ff

      4: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

          link/ether 00:1e:67:c7:cb:0a brd ff:ff:ff:ff:ff:ff

      5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000

          link/ether 00:1e:67:c7:cb:0b brd ff:ff:ff:ff:ff:ff

          inet 10.158.11.134/27 brd 10.158.11.159 scope global eth1

          inet 10.158.11.157/24 brd 10.158.11.255 scope global eth1


      * expected output "inet 10.158.11.157/24 brd 10.158.11.255 scope global secondary eth1"

       

       

      [root@PROXY02 ~]# ip addr show

      1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

          link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

          inet 127.0.0.1/8 scope host lo

          inet6 ::1/128 scope host

             valid_lft forever preferred_lft forever

      2: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

          link/ether 68:05:ca:38:56:ea brd ff:ff:ff:ff:ff:ff

      3: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

          link/ether 68:05:ca:38:56:eb brd ff:ff:ff:ff:ff:ff

      4: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

          link/ether 00:1e:67:c7:d2:fd brd ff:ff:ff:ff:ff:ff

      5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000

          link/ether 00:1e:67:c7:d2:fe brd ff:ff:ff:ff:ff:ff

          inet 10.158.11.135/27 brd 10.158.11.159 scope global eth1

       

      Thanks,

      Sridhar