6 Replies Latest reply on Jun 30, 2016 8:52 PM by dragonknight

    /opt/mwg/temp is full and grows so fast.


      Hi all,

      I'm using MWG v7.4. /Opt/mwg/temp folder is full, I did using CLI "service mwg restart" to remove it. But I see this folder grows so fast. In 3 hours, this folder is full (22GB) again.

      Please help me this case.



        • 1. Re: /opt/mwg/temp is full and grows so fast.

          3 quick thoughts on  options:


          Rule tracinig is enabled

          Connection Tracing is enabled

          The gateway creates corefile constantly.


          Check if you have rule tracing enabled per a rule.

          Check if connection tracing is enabled under Configuration > Troubleshooting

          Check as part of Troubleshooting > Logs if you see many cores.


          potential options:

          you are using a VM and the disk too small <200GB.



          • 2. Re: /opt/mwg/temp is full and grows so fast.

            Dear Michael,

            Thanks you for your help.


            Rule tracinig is enabled => no

            Connection Tracing is enabled => no

            I did reboot MWG but the issue still not solve.

            i'm using a VM and the disk > 400GB.

            Pls help me .




            • 3. Re: Re: /opt/mwg/temp is full and grows so fast.

              Hi DK,


              If you traverse to that directory and pull a directory listing what's there?


              cd /opt/mwg/temp

              ls -lah


              I'm curious about the date and size of the temp files.




              • 4. Re: /opt/mwg/temp is full and grows so fast.

                Same problem here, we get files called mwg-core_tempfile in /opt/mwg/temp


                     -rw-r--r-- 1 mwg mwg   457362 Jun 30 13:02 mwg-core_tempfile1467284543-2346

                     -rw-r--r-- 1 mwg mwg   107507 Jun 30 13:16 mwg-core_tempfile1467285405-3513

                     -rw-r--r-- 1 mwg mwg  2632202 Jun 30 13:20 mwg-core_tempfile1467285651-3773

                     -rw-r--r-- 1 mwg mwg    66434 Jun 30 13:26 mwg-core_tempfile1467286007-4055

                     -rw-r--r-- 1 mwg mwg   637987 Jun 30 13:35 mwg-core_tempfile1467286535-4927


                Those files are never older than 1 hour. Looks good so far.


                But since 2 days we are encountering the problem that there's one file that keeps growing until the partition is full and the appliance stops working. That happened at a filesize of about 25GB last time.

                It happened 3 times now. Fortunately only one gateway in the cluster is affected at a time.


                Our first thought is a download of a very big file by the user that causes the problem. Can anybody confirm that downloads are stored in /opt/mwg/temp in order to get scanned for viruses? Or are we heading the wrong direction?


                We are skipping anti virus on large files in the ruleset but maybe the webserver does not report the size of the file at the beginning of the download.




                • 5. Re: /opt/mwg/temp is full and grows so fast.

                  Hi all,

                  we saw the same yesterday at a customer where the TMP partition was 40GB in Size. Therefore we executed the mwg-cache-wizard tool and changed to the alternate disk schema.

                  After a reboot files with almost approx. 60GB where stored in this partition.

                  - There is no tracing active

                  - The LOG Files are removed

                  But regardless, with less user traffic, there are approx. 60GB stored in the TMP directory (info on the MWG GUI)


                  We did no further analysis, because now, with the changed partition schema anything is fine. :-)



                  • 6. Re: /opt/mwg/temp is full and grows so fast.

                    Hi all,


                    Every one can try use CLI: service mwg restart, then reboot MWG => MWG will work well.