1 Reply Latest reply: Aug 13, 2014 11:52 AM by tonyw RSS

    DLP Monitor web page not working




      i have a DELL power edge server with esxi 5.5 installed.

      the DLP manager 9.3.1 installed and work fine with EPO 4.6.7, but after install the dlp monitor i cant access to the web page and the service stingray is down.


      /sbin/sysctl -p /data/stingray/etc/sys_ctl

      net.ipv4.tcp_window_scaling = 0

      net.ipv4.tcp_timestamps = 0

      net.ipv4.conf.all.send_redirects = 0

      net.ipv4.conf.all.secure_redirects = 0

      net.ipv4.conf.all.accept_redirects = 0

      net.ipv4.conf.default.accept_redirects = 0

      net.ipv4.conf.default.secure_redirects = 0

      net.ipv4.conf.default.send_redirects = 0

      net.ipv4.conf.eth1.send_redirects = 0

      net.ipv4.conf.eth1.secure_redirects = 0

      net.ipv4.conf.eth1.accept_redirects = 0



      /usr/bin/ipcs -m >/data/stingray/tmp/shm_destroy.6646


      master(): /data/stingray/bin/shm_destroy

      stingray IPC is destroyed


      current stingray state = STOP

      setting state = DESTROY


      current stingray state = DESTROY


      /etc/init.d/stingray[253]: _start: line 124: 6651: Abort(coredump)

      current stingray state = DESTROY


      [start] requires current state to be INIT




      any one know how to fix this ????

        • 1. Re: DLP Monitor web page not working

          Check in the following files for an error:




          If the Manager worked but a Monitor isn't, it's possible that the secondary partition for the RFS isn't being seen.  It will throw an error stating /dev/sdb1 or /dev/sdb2 cannot be found.  A Manager will function without it, but the other platforms require it.