No here - tried several devices the latest being a Dell Latitude 10 ST2, products install fine, PBA touch screen all good after a BIOS update but crashes right after authentication before getting to Windows.
I've made some headway on this...
Dell XPS12 (Gen3 CPU) - Have been provided a Hotfix to test
Dell XPS12 (Gen4 CPU) - Have been asked to try above hotfix also
Lenovo Helix - Setting USB 3.0 Mode to disabled in bios/uefi config (as per http://kc.mcafee.com/corporate/index?page=content&id=KB78632) gets everything working perfectly; except that this disables USB 3.0. This will have a significant impact on performance of USB 3.0 devices, so is not ideal.
Samsung Slate7 - No Change
In regards to the XPS12.....are you talking about a hotfix from McAfee, Microsoft, or Dell?
The HotFix is from McAfee.
It is actually a combination of both, there is a BIOS / UEFI firmware update that needs to be present in the device, version A07. Then you need an hotfix from us to complete the solution.
I'm already on A07 so all I need is the hotfix. Just opened a ticket with platinum support. Thanks for the info!