9 Replies Latest reply on Jul 22, 2011 4:04 AM by jelz

    Not able to retrieve snmp info on MWG6 from the additional MIBs

      Hi Guys,

       

      I am trying to get physical diskstatus from McAfee Web gateway 6 by SNMP. So far I have been succesfull in retrieving the "standard" SNMP information, but not succesfull in getting the additional information as described in the guide "Advanced hardware monitoring for Webwasher appliances" written by Michael Schneider.

      Following the I should be able to get info from the dcstorag.mib

       

      1. I installed the srvadmin-snmp via yum.

      2. I had set the global.SNMPAgent.SMUXEnabled  to 1

       

          admin@WWSNMPtest> get global.SNMPAgent.SMUXEnabled

          1

          admin@WWSNMPtest>

       

      3. I performed a webwasher-csm service restart

      4. I see the extra port on the MWG:

       

          [root@WWSNMPtest ~]# netstat -na

          Active Internet connections (servers and established)

          Proto Recv-Q Send-Q Local Address               Foreign Address             State

          tcp        0      0 127.0.0.1:199               0.0.0.0:*                   LISTEN

          tcp        0      0 0.0.0.0:9161                0.0.0.0:*                   LISTEN

          udp        0      0 0.0.0.0:9161                0.0.0.0:*

       

      But when I try to retrieve information, it is not successfull:

       

          jelmar@tux-01:~ [63] % snmpwalk -v 2c -c pine tcp:192.168.20.189:9161 .1.3.6.1.4.1.674.10893.1.20.130   <-- using an OID from a new MIB

          SNMPv2-SMI::enterprises.674.10893.1.20.130 = No Such Object available on this agent at this OID

          jelmar@tux-01:~ [64] %

          jelmar@tux-01:~ [64] % snmpwalk -v 2c -c pine tcp:192.168.20.189:9161 .1.3.6.1.2.1.25.5.1.1.1    <-- using an already existing OID

          HOST-RESOURCES-MIB::hrSWRunPerfCPU.1 = INTEGER: 80

          HOST-RESOURCES-MIB::hrSWRunPerfCPU.2 = INTEGER: 24

          etc

       

      I also tried to get information from the other OID's by performing a snmpwalk without specifying an OID, but this doesn't show more then the "regular" SNMP information without the extra OID's:

          SNMPv2-MIB::sysDescr.0 = STRING: Webwasher 6.9.0

          DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (82718) 0:13:47.18

          IF-MIB::ifNumber.0 = INTEGER: 2

          RFC1213-MIB::atIfIndex.1.1.192.168.20.1 = INTEGER: 1

          IP-MIB::ipForwarding.0 = INTEGER: notForwarding(2)

          TCP-MIB::tcpRtoAlgorithm.0 = INTEGER: other(1)   

          UDP-MIB::udpInDatagrams.0 = Counter32: 0

          HOST-RESOURCES-MIB::hrSystemUptime.0 = Timeticks: (86219) 0:14:22.19

       

      I am testing this on MWG 6.9 build 10927.

       

      Please let me know if you have any ideas.

      Kind regards,

      Jelmar