I have problem routing traffic from a 24 bits subnet to a 22 bits subnet, if i try to ping from a peer 22 bits to the 24 bits the ping is not reached, but if i ping from the firewall directly is reached my scenario is the following:
Firewall Internal IP Address: 192.168.10.1/22
Firewall External IP address: 10.10.1.1/24
Remote Branch office Wan Address: 192.168.13.0/24
Router to 192.168.13.x subnet: 192.168.10.?
Ping 192.168.10.? (router to subnet 13) with my old firewall is reached
Ping 192.168.10.? (router to subnet 13) with MFE Directly in ssh console is reached
Ping 192.168.13.? (peer in remote branch) with MFE Directly in ssh console is reached
Ping 192.168.13.? (peer in remote branch) with my laptop in 192.168.10.x subnet (LAN) is NOT reached
Static route Network 192.168.13.0 255.255.255.0 192.168.10.x
ACL Rule for testing purposes: App:ANY Src Zone: Internal Dest Zone:Any Dest:192.168.13.x/24 NAT: Localhost APP Defense: Conn Settings
Dynamic Routing: Disabled all protocols
Route Status: 192.168.13.0/24 192.168.10.? UGS internal em1
I have static routes to external routers working fine.
El mensaje fue editado por: Bernardo Perez on 8/09/10 07:45:47 PM CDT