Just looking for some guidance with a closed network with ePO , set up checklist I was provided is for a network enabled setup, there are references to connecting to sites that of course I cannot connect to . Am very new to ePO. Thank you for any guidance. v/r
Solved! Go to Solution.
The following is a good starting point:
Create and configure repositories on FTP or HTTP servers and UNC shares (page 73)
Saw this in another post; copy contents of ftp://ftp.nai.com/CommonUpdater and place the contents in a shared network directory, setting permissions on the share accordingly ..... Setup a new ''Source Site'' on the Client and point it to your UNC share you have created on the network containing the synced contents of the online NAI site, and the user account with access.
Thank you tao, have less than 100 nodes so have 1 distributed repository, but am looking more for something involving the installation , all manuals / documents that were provided to my all reference having a networked environment with internet connection. There were quite a few "steps " that I had to skip during my "check " of how the last admin set up ePO 5.3.1 , I am wanting to just restart from scratch , mostly for the experience , its like coming into the kitchen and soup is on the stove and there are no recipes available ...lol not sure 100% what ingredient's were put in.
"...but am looking more for something involving the installation" of what - ePO, VSE or the Agent? As for VSE or the Agent:
1) VSE - take a look at <> Installation Designer 8.8 Product Guide : enables an administrator to preconfigure a VirusScan Enterprise software package for installation on one or more computers (creates a standalone exe for ePO or for use with other deployment tools). .
For updateing VSE on a closed network; follow the above post .... copy contents of ftp://ftp.nai.com/CommonUpdater and place the contents in a shared network directory, setting permissions on the share accordingly ..... Setup a new ''Source Site'' on the Client and point it to your UNC share you have created on the network containing the synced contents of the online NAI site, and the user account with access.
2) Agent - How to create a custom agent installation package in ePolicy Orchestrator Technical Articles ID: KB51661 Last Modified: 11/10/2016
Tao showed up the import thing, where to get the updates and this is how we use it.
Installation of ePo: there is no difference open/closed network. Also updating the clients
you can follow the same procedure if you are in a closed/open network.
If you are supporting different domains, in different network, you can setup a man-in-the-
middle-server, with 2 interfaces, one into each network. First open IF1 on the mitm-server,
replicate the repository from network-a to the mitm-server, shut-off IF1, open IF2 and
replicate from server to network-b, shut-down IF2.
some more information about system:
about 400 clients (laptop, Workstations, Servers) with W200364bit, w2k8r2, w2012r2, w7, w10
epo running on Hyper-V as guest with w2012r2, sql on the same server
VSE: 8.8 P8
Agent: actual using 5.0.283 evaluating 220.127.116.119
Clients from 18.104.22.1688 to 22.214.171.1249
if you further questions, feel free to ask.