TCP-UDP Ports between ePO and Superagent+Relay server

[Prashant_Joshi]

I need the list of TCP/UDP/Etc Ports required for EPO server to Superagent + Relay Server :

We are using ePO 5.3.0, i know its old and support is not available. But we are forced to use this software only..... Sorry😂

-> ePO 5.3.0 is installed on Windows 2008 Sever R2 computer.
-> Superagent+Relay Server is configured in Windows 7 Operating system along with McAFee Viruscan 8.8.
-> Superagent + relay server PC as menetioend above shares local ( distributed) repository to other agent computers which are connected to Superagent+ relay server.

We are completely disabling the windows firewall on all computers.

But between ePO and SuperAgent+ Relay server computer, SIEMENS RX1500 firewall is configured.

I need to know exact list of TCP/UDP/etc ports required to be kept open between ePO and Supergent+Relaysever Zones ( Computers).

I tried several ports like 443,8081,8082,8083 etc etc.

However, seems this list is not sufficient, as all works fine when the firewall is configured to accept all traffic ( firewall bypassed).

Please do not refer to any McAfee link . It will be great help if mentioned in below format.

1. ePO -> Superagent +Relay Sever - (TCP) Ports -
2. ePO -> Superagent +Relay Sever - (UDP) Ports -
3. SuperAgent+ Relay Sever -> (TCP) Ports -
4. SuperAgent+ Relay Sever -> (UDP) Ports -
5. ePO -> Superagent +Relay Sever - (any other) Ports -
6. SuperAgent+ Relay Sever -> (any other ) Ports -

Need urgent Support as I am stuck at site location.

[vivs]

Hello @Prashant_Joshi 

Thanks for your post.

Please refer the below KB article for all the ports needed :

https://kc.mcafee.com/corporate/index?page=content&id=KB66797

Was my reply helpful?
If you find this post useful, Please give it a Kudos! Also, Please don't forget to select "Accept as a solution" if this reply resolves your query!

[Prashant_Joshi]

Many Thanks !!!   For the support.  I done my analysis from the below mentioned  - KB.  

But I need to compare it with expert opinion….

https://kc.mcafee.com/corporate/index?page=content&id=KB66797&_ga=2.183842468.367014957.1599401565-8...

Is it possible for you to mention it in below format.

This will really support.  

1. ePO -> Superagent +Relay Sever - (TCP) Ports -
2. ePO -> Superagent +Relay Sever - (UDP) Ports -
3. SuperAgent+ Relay Sever -> (TCP) Ports -
4. SuperAgent+ Relay Sever -> (UDP) Ports -
5. ePO -> Superagent +Relay Sever - (any other) Ports -
6. SuperAgent+ Relay Sever -> (any other ) Ports -

[cdinet]

1. ePO -> Superagent +Relay Sever - (TCP) Ports - 8081
2. ePO -> Superagent +Relay Sever - (UDP) Ports - 8083 (this one is for the clients to discover relay server, so it isn't epo to the relay, but clients to relay server)
3. SuperAgent+ Relay Sever -> (TCP) Ports - 443
4. SuperAgent+ Relay Sever -> (UDP) Ports - 8082 for superagent to forward msgs from epo to clients, 8083 only if they are doing discovery for relay
5. ePO -> Superagent +Relay Sever - (any other) Ports -
6. SuperAgent+ Relay Sever -> (any other ) Ports -

It seems like you aren't taking into consideration the traffic to/from the clients.  All the ports, direction and protocols are in that KB for firewall requirements.