Hi, Thanks for the feedback.
When we configure the Published System Name and Published IP address for the DMZ DXL broker, they do not stay once settings are saved. Must the the Published System Name and Published IP address be different from the actual System name and IP address of the DMZ DXL broker?...Thanks
We have a logged a SR with McAfee, will wait for response to see what could be the possible reason/s be for the external systems not communicating to the DMZ DXL broker...Thank you
we most likely will like to see the DXL log from one of the clients, if you can in the mean time, can you take a look at it, it is located:
the name of the log is "dxl_service.log" . Right at the end it will contain info on why its failing to connect to a preferred broker and we can take it from there, maybe with a telnet to it and see if it can reach the broker
Thanks for the feedback,
As per "dxl_service.log" from one of the external clients, it shows that the DXL client is trying to communicate with the Internal DXL brokers and NOT the DMZ DXL broker and it is failing.
Even in the "dxl_property.config" file, the "BrokerList= " only shows the Internal DXL brokers and NOT the DMZ DXL broker. We have applied the DXL client policy specifying only the DMZ DXL broker for the external clients but it does not show.
Also, we are able to telnet from the external client to the DMZ DXL broker...Thanks
We need to wait for Mcafee agent to communicate to the Agent handler to pick the newly created policy including the DMZ broker, that is done on the regular Agent to server communication interval (default 60 mins).
If that has happened already then we need to look at an MER and see if the agent has the correct policy locally or if is having any issues enforcing it.
for that we will need a case with support as the policies are encrypted locally
Hi, with the help of McAfee Support we have resolved the DXL communication issue.
Once we verify that the DXL policies are all correct for broker and client, we then ran this command in browser, substituting your system name and port for epo server. The external clients then started to communicate with the DMZ DXL broker...Thanks