cancel
Showing results for 
Search instead for 
Did you mean: 
terrychan
Level 7

Web Gateway transparent router mode

Jump to solution

Hi there,

I would like to configure the transparent router mode in web gateway, but after enable the router mode, I found that the internal PC is not able to access Internet.

Following is my configure procedure:

1. Define 2 network interface in web gateway

2. Enable transparent router mode

3. Add http in port redirect

4. Enable http and ftp proxy

5. Save and restart web gateway

Anyone know is there any part I missed in the configuration?

Attached my basic network diagram.

Thanks so much.

0 Kudos
1 Solution

Accepted Solutions
eelsasser
Level 15

Re: Web Gateway transparent router mode

Jump to solution

Did you put a static route in the router to gateway the client traffic back the 172.16.1.0 network?

The router sees the 172.16.1.0 traffic and needs to know that 192.168.1.200 will accept the responses to get the data back to the client.

0 Kudos
2 Replies
eelsasser
Level 15

Re: Web Gateway transparent router mode

Jump to solution

Did you put a static route in the router to gateway the client traffic back the 172.16.1.0 network?

The router sees the 172.16.1.0 traffic and needs to know that 192.168.1.200 will accept the responses to get the data back to the client.

0 Kudos
terrychan
Level 7

Re: Web Gateway transparent router mode

Jump to solution

Thanks eelsasser,

I fixed the problem by adding the static route, thanks so much.

0 Kudos