cancel
Showing results for 
Search instead for 
Did you mean: 
chvgms
Level 7

MWG HA

Hi,

I have implemeneted HA between 2*4500C appliances. Though it is working as expected, but when i execute "ip addr show" i am not getting the expected result. Ideally we should see "secondary <interface> " in the command output on the director node, but i dont see that. what could be the reason?

[root@PROXY01 ~]# ip addr show

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: eth2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000

    link/ether 68:05:ca:38:5a:f8 brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.1/24 brd 192.168.0.255 scope global eth2

3: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

    link/ether 68:05:ca:38:5a:f9 brd ff:ff:ff:ff:ff:ff

4: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

    link/ether 00:1e:67:c7:cb:0a brd ff:ff:ff:ff:ff:ff

5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000

    link/ether 00:1e:67:c7:cb:0b brd ff:ff:ff:ff:ff:ff

    inet 10.158.11.134/27 brd 10.158.11.159 scope global eth1

    inet 10.158.11.157/24 brd 10.158.11.255 scope global eth1


* expected output "inet 10.158.11.157/24 brd 10.158.11.255 scope global secondary eth1"

[root@PROXY02 ~]# ip addr show

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

2: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

    link/ether 68:05:ca:38:56:ea brd ff:ff:ff:ff:ff:ff

3: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

    link/ether 68:05:ca:38:56:eb brd ff:ff:ff:ff:ff:ff

4: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000

    link/ether 00:1e:67:c7:d2:fd brd ff:ff:ff:ff:ff:ff

5: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000

    link/ether 00:1e:67:c7:d2:fe brd ff:ff:ff:ff:ff:ff

    inet 10.158.11.135/27 brd 10.158.11.159 scope global eth1

Thanks,

Sridhar

0 Kudos