cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted

MWG 7.8.2 cannot access interface counters by snmp

Jump to solution

Hi

yesterday we upgraded our webgateway appliances from 7.7.2.x to 7.8.2.4. Since then we cannot read interface counters by snmp anymore.

We use the OID 1.3.6.1.2.1.2.2.1.2 (interface description) to find the interface name. Now all descriptions jus show "Intel Corporation I350 Gigabit Network Connection", so it's not possible to look for a specific interface anymore. That's a bad change.

Does anybody know of a workaround or about some info how to map the intefaces to the standard MIB?

Is this already a known problem?

 

Regards, Othmar

1 Solution

Accepted Solutions

Re: MWG 7.8.2 cannot access interface counters by snmp

Jump to solution

thank you. However that OID does not match very well with the index from 1.3.6.1.2.1.2.2.1.1 to check for errrors and discards.

In the meantime I found that 1.3.6.1.2.1.31.1.1.1.1 helps quite well.

2 Replies
McAfee Employee aloksard
McAfee Employee
Report Inappropriate Content
Message 2 of 3

Re: MWG 7.8.2 cannot access interface counters by snmp

Jump to solution

Hi,

Hope you are doing well.

I've found the network interface names at iso.3.6.1.2.1.25.3.2.1.3

iso.3.6.1.2.1.25.3.2.1.3.262145 = STRING: "network interface lo"
iso.3.6.1.2.1.25.3.2.1.3.262146 = STRING: "network interface eth0"
iso.3.6.1.2.1.25.3.2.1.3.262147 = STRING: "network interface eth1"
iso.3.6.1.2.1.25.3.2.1.3.262148 = STRING: "network interface eth2"
iso.3.6.1.2.1.25.3.2.1.3.262149 = STRING: "network interface eth3"
iso.3.6.1.2.1.25.3.2.1.3.262150 = STRING: "network interface eth10"
iso.3.6.1.2.1.25.3.2.1.3.262151 = STRING: "network interface eth11"
iso.3.6.1.2.1.25.3.2.1.3.262152 = STRING: "network interface eth12"
iso.3.6.1.2.1.25.3.2.1.3.262153 = STRING: "network interface eth13"
iso.3.6.1.2.1.25.3.2.1.3.262154 = STRING: "network interface eth4"
iso.3.6.1.2.1.25.3.2.1.3.262155 = STRING: "network interface eth5"
iso.3.6.1.2.1.25.3.2.1.3.262156 = STRING: "network interface eth6"
iso.3.6.1.2.1.25.3.2.1.3.262157 = STRING: "network interface eth7"
iso.3.6.1.2.1.25.3.2.1.3.262158 = STRING: "network interface eth8"
iso.3.6.1.2.1.25.3.2.1.3.262159 = STRING: "network interface eth9"
iso.3.6.1.2.1.25.3.2.1.3.262160 = STRING: "network interface gre0"
iso.3.6.1.2.1.25.3.2.1.3.262161 = STRING: "network interface gretap0"
iso.3.6.1.2.1.25.3.2.1.3.262162 = STRING: "network interface ip6tnl0"
iso.3.6.1.2.1.25.3.2.1.3.262163 = STRING: "network interface ip6gre0"
iso.3.6.1.2.1.25.3.2.1.3.262164 = STRING: "network interface gre1"

 

 

Regards

Alok Srada

Re: MWG 7.8.2 cannot access interface counters by snmp

Jump to solution

thank you. However that OID does not match very well with the index from 1.3.6.1.2.1.2.2.1.1 to check for errrors and discards.

In the meantime I found that 1.3.6.1.2.1.31.1.1.1.1 helps quite well.

More McAfee Tools to Help You
  • How-to: Endpoint Removal Tool
  • Support: Endpoint Security
  • Visit: Business Service Portal
  • More: Search Knowledge Articles
  • ePolicy Orchestrator Support
  • The McAfee ePO Support Center Plug-in is now available in the Software Manager. Follow the instructions in the Product Guide for more.