Hi All,
We have downloaded and imported the Allow Webex ruleset from the contentsecurity site. However, the “Citrix IP Ranges” list, which according to the documentation is a McAfee maintained list is blank and has not been updates with any IP addresses. Do we need to anything in particular to get his list to be udates?
Thanks,
Brian
Solved! Go to Solution.
Hi Brian,
are you running the 7.2 Beta of MWG? The maintained lists are not available in versions < 7.2.
Best,
Andre
Hi Brian,
are you running the 7.2 Beta of MWG? The maintained lists are not available in versions < 7.2.
Best,
Andre
Hi Andre,
No, we are running V7.1.0.6. Thanks for the info. We will wair for the production release of 7.2 and then test this.
Regards,
Brian
Hi Brian,
as an alternative you can use the imported rule set and associate it with a list that you will with the following IP ranges:
216.115.208.0/20
216.219.112.0/20
66.151.158.0/24
66.151.150.160/27
66.151.115.128/26
64.74.80.0/24
202.173.24.0/21
67.217.64.0/19
78.108.112.0/20
68.64.0.0/19
206.183.100.0/22
173.199.0.0/18
It should do the same thing but - certainly - will not update automatically.
Best,
Andre
Hi Andres,
Thats great, thanks for that. If possilbe, could you provide me with the IP address range for the GoToMeeing servers please?
thanks,
Brian
Hello,
I think I was a little confused because the subject says "GoToMeeting" and the text says "Webex" 🙂
So in the post above you find the Citrix/GoToMeeting IP ranges. Below you will find the IP ranges for WebEx.
64.68.96.0/19
66.114.160.0/20
66.163.32.0/20
209.197.192.0/19
210.4.192.0/20
62.109.192.0/20
208.8.81.0/24
114.29.192.0/19
173.243.0.0/20
Best,
Andre
Corporate Headquarters
6220 America Center Drive
San Jose, CA 95002 USA