Showing results for 
Show  only  | Search instead for 
Did you mean: 

Web Gateway: Configuring your Remote Access Card (RMM)


Do you have a newer model appliance? If you do, and you haven’t configured your remote access card, you are missing out on some very useful functionality -- and you’d be well served to get it configured today.


What are Remote Access Cards?

Let’s assume for a moment that you are reading this document and you have never heard of RMM. Remote Access Cards give you basically all the functionality of sitting directly in front of your appliance in your server room, but without all the noise/heat/leaving your desk.


You can reboot -- power on from a true power off -- you can even re-image your appliance if needed. Beyond that, you are able to look at hardware health information and the System Event Log.


Your remote access card operates completely independently from the host system/OS. That means you can reboot your machine, or even power it off entirely, and you can still get access to your appliance. With the remote console, you can even get into your BIOS/RAID controller BIOS if needed, all from the comfort of your workstation outside of the server room and potentially hundreds of miles away from it.


Which MWG appliances have remote access cards?

The following models have remote access cards available:


How do I set up my remote access card?

The steps are different depending on whether you are using RMM. Both require a unique IP and a separate ethernet connection.



First, connect your RMM to your network, you can find the RMM port on the back of your appliance:




Boot your system into the BIOS (F2 at startup).Navigate to Server Management -> BMC LAN Configuration.


Configure your IP address, subnet mask and Gateway IP for your Intel RMM LAN configuration, as shown here.

NOTE: Do not configure your Baseboard LAN. Enabling both BMC and RMM can cause interface conflicts and lead to problems accessing your RMM.


Finally, scroll down to the ‘User configuration’ section. You can define accounts and set passwords here. For now, just select the ‘root’ user, and change the password to something you will remember.


Save the changes in the BIOS and exit, then you can allow your box to boot as normal. You should now be able to access your RMM GUI via HTTPS in the browser


Remote Access Card Usability

If you don’t have any pressing needs, you’re good to go. Simply having the remote access card configured and available if need be puts you a step ahead if and when you need to troubleshoot an issue or re-image an appliance. I’ll touch on a few main functionalities in RMM below.



After logging into your RMM - you will be brought to the System Information screen. Unfortunately, there’s not a lot of useful information or links on this tab. To locate your appliance’s serial number, click on the ‘FRU Information’ on the left-hand side.




It’s also worth noting here that the ‘System Diagnostics’ section, while it sounds useful, actually isn’t. It outputs a password protected ZIP file which cannot be viewed by you or even MWG Support Engineers.


A useful troubleshooting tool is the System Event Log, which can be found under Server Health -> Event Log. If you suspect you are having a hardware issue, you can often find evidence of that here.




To power on/off or reboot the appliance from your RMM, you can do so under the Remote Control -> Server Power Control section.



Lastly, and perhaps most important, you can gain access to the remote console under the Remote Control -> Console Redirection section of your GUI.


From the JViewer console - you can interact with your appliance as though you were at the physical console - including modifying BIOS/RAID configuration as well as regular console interaction with your MWG and re-imaging.


On the point of re-imaging, if you needed to do so, you can mount an ISO file to the virtual drive under the Device -> Redirect ISO option.



Then, once mounted, you can reboot your machine, and then enter the boot menu by pressing F6 and proceed to re-image your appliance as normal.



I hope that this document has opened your eyes to the value of configuring your RMM -- and the time savings it has the potential to bring to you. In my opinion, being able to handle the power states of your box, directly control the console/BIOS/RAID Controller and even re-imaging from the comfort of your workstation instead of standing in a server room seems to be well worth the 5 minutes it took to configure it initially.

Labels (1)

If you have issues accessing the appliances RMM over https, try http, if it is still failing you will need to reboot the RMM card. To reboot the RMM card pull power from the appliance for 30 seconds. If you are still having connection problems after the RMM reboot has been completed please contact technical support.


Note that the RMM guide can be found here:

Buried within that document you will find the following statement:: "The Remote Console window is a Java Applet* that establishes TCP connections to the Intel® RMM3 module. The protocol that is used to run these connections is a unique KVM protocol and not HTTP or HTTPS. This protocol uses ports #7578 for KVM, #5120 for CDROM media redirection, and #5123 for Floppy/USB media redirection. Your local network environment must permit these connections to be made, that is, your firewall and, in case you have a private internal network, your NAT (Network Address Translation) settings have to be configured accordingly."

Which means that in order to use the full functionality of the RMM the client machine will need to be able to access the RMM not only on ports 80 and 443, but also on ports 5120, 5123, and 7578

The SMASH interface is also available via SSH (port 22) and if you want to use that you need to open that port as well


Does anyone know if this RMM configuration section is identical for the RMM4 on the 5500C ?

Can anyone point me to a picture/diagram of the ports on the 5500C ?



RMM configuration is the same.

Diagram in the 7.5 installation guide, but unfortunately there are two unlabeled ports, the one on the far right that doesn't even look like a LAN port in the installation guide is RMM. The unlabeled one next to the video connector is actually a serial port. Picture below should help


Version history
Revision #:
2 of 4
Last update:
‎03-20-2018 01:37 PM
Updated by:

Community Help Hub

    New to the forums or need help finding your way around the forums? There's a whole hub of community resources to help you.

  • Find Forum FAQs
  • Learn How to Earn Badges
  • Ask for Help
Go to Community Help

Join the Community

    Thousands of customers use the McAfee Community for peer-to-peer and expert product support. Enjoy these benefits with a free membership:

  • Get helpful solutions from McAfee experts.
  • Stay connected to product conversations that matter to you.
  • Participate in product groups led by McAfee employees.
Join the Community
Join the Community