×
cancel
Showing results for
Show  only  | Search instead for
Did you mean:
Former Member
Not applicable
Report Inappropriate Content
Message 51 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

Hi guys

We have been doing some tests here and might be getting close to an answer, at least for us. We have found that if you disable Common Standard Protection > Prevent termination of McAfee processes for both block and reporting, the MFeB leak stops. By a process of elimination, we think that the problem is due to a clash between our host's Intel ILO drivers, and the VSE P6. This is because for us, we have only seen the leak happen on our Intel servers, it has not happened on our Dell hosts. However, on our last test overnight, with what we thought were all the ILO processes excluded, MFeB still got bigger on our test host with "prevent termination" on. We will continue to test and I will update.

McAfee Employee
Report Inappropriate Content
Message 52 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

FYI, from what we have seen of memory dumps provided to us for analysis of this issue, we believe the issue is solved by code changes that are releasing with Patch 7.

We do not know that of a surety at this time, but have extended a test package to a couple of customers in hopes they can solidify our belief.

If you want to assist us in proving the theory, reach out to Support. We'll first want to confirm you're seeing the MFeB pool tag increase issue, and in what timeframe the leak becomes noticeable so that when the test package is installed we'll have confidence in the results.

William W. Warren | S.I.R.R. | Customer Success Group | McAfee
Former Member
Not applicable
Report Inappropriate Content
Message 53 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

hi wwarren

As you may know The MFeB tag comes within the installation of syscore 15.2.x , So it will be there if agent 5.02 is installed therefore you will have the memory leak even if you have vse 8.8 p4 and access protection blocking,  so p7 will be good with agent 4.8.   if you provide me with your contact i will send  you a tool to show this issue if there is AP blcoking for agent 5.02 or vse p6 so you do not have to wait for customers feedback and speed up the fix.

Best regards

McAfee Employee
Report Inappropriate Content
Message 54 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

if you provide me with your contact i will send  you a tool to show this issue if there is AP blcoking for agent 5.02 or vse p6 so you do not have to wait for customers feedback and speed up the fix.

Sure. Upload it to me here:

ftp://custftp2.nai.com/incoming/tier3/wwarren, just let me know the filename.

Anonymous will let you connect and place the file.

The filename must be unique and we don't allow listing folder content

William W. Warren | S.I.R.R. | Customer Success Group | McAfee
Former Member
Not applicable
Report Inappropriate Content
Message 55 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

• Make sure that the web address is correct.
• Look for the page with your search engine.
• Refresh the page in a few minutes.
McAfee Employee
Report Inappropriate Content
Message 56 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

Yeah, it's not a website, it's an FTP location.

e.g. At a CMD prompt, type

FTP -A custftp2.nai.com      (the A is case sensitive)

Then at the ftp prompt, type

TYPE binary

PUT C:\path\to\yourfile.exe incoming\tier3\wwarren\yourfile.exe

Thanks,

William W. Warren | S.I.R.R. | Customer Success Group | McAfee
Former Member
Not applicable
Report Inappropriate Content
Message 57 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

C:\test>FTP -A custftp2.nai.com

ftp: connect :Connection refused

McAfee Employee
Report Inappropriate Content
Message 58 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

That would be your own firewall/network policies refusing that connection. I can't help you with that sorry.

If you want to make the tool available some other way I'll be happy to grab it.

William W. Warren | S.I.R.R. | Customer Success Group | McAfee
Former Member
Not applicable
Report Inappropriate Content
Message 59 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

there is no firewall and I disabled the AP the same error comes back, send your email to alhaawi4321@yahoo.com please

Former Member
Not applicable
Report Inappropriate Content
Message 60 of 74

## Re: High memory usage on servers since upgrading to VSE 8.8 P6

Is there an ETA on Patch 7 or a hotfix to resolve this? Sorry to say, I've already submitted an MER and was basically told there was nothing there, so forgive me for not wanting to bother with that again to get the limited release patch.

You Deserve an Award

# Community Help Hub

New to the forums or need help finding your way around the forums? There's a whole hub of community resources to help you.

• Find Forum FAQs
• Learn How to Earn Badges