cancel
Showing results for 
Search instead for 
Did you mean: 

SG560 v4.0.8 auto-negotiate fails

After updating to 4.0.8 on our SG560 a few weeks ago we've had infrequent, intermittent network slowdowns and outages. I had chalked it up to ISP problems (Cox Business Fibre), but after digging further in the logs it appeared their Cisco router (2600 series--old, discontinued hardware) was seeing lots of speed negotiation resets from the SG560, which is connected on Port B and was set to auto-negotiate. This morning I forced the SG560 Port B to 100Mbit full duplex and so far we're not seeing any more resets.

Thought I'd share this in case someone else is having similar symptoms.

-Terry

1 Reply
rcamm
Level 13
Report Inappropriate Content
Message 2 of 2

Re: SG560 v4.0.8 auto-negotiate fails

Thanks for sharing that Terry...it is a useful tip