I have re-deployed SIEM's Virtual Machines with version 10.0. I have configuration backup of ESM 9.6.0 now when I am trying to restore the backup nothing is happening.
I have uploaded the backup and initiated the process but after sometime I am getting the same new ESM with 10.0 none of the settings from 9.6.0 is applying.
The issue was identified it was a missing MR version due to which the database restore was failing.
Now I am facing a new issue that is after the database restore and SIEM system reboot I am getting the below error.
'The database is unavailable at this time. Checking for availability.'
Any idea what could have been wrong.?
This occurs either when an upgrade is occurring or the database has errors.
Look inside /usr/local/ess/data/NitroError.Log and /var/log/message.
If there are DB errors you can fix them with DBCheck (this example fixes Log table):
DBCheck -d '/usr/local/ess/data/ngcp.dfl|127.0.0.1|1111' -c
DBCheck -d '/usr/local/ess/data/ngcp.dfl' -c
DBCheck -d '/usr/local/ess/data/ngcp.dfl' -t "Log" -r
Assuming this took too long you can try the following.
service cpservice stop
service dbserver stop
and then run the DBCheck commands from my previous post. Fortunately this will find some table corruption and fix it.
Ok, The Restore procedure is as follows
1. build ESM 9.6.0
2. prepair to backup file.(must to the same version to ESM/ERC/ACE..)
so 9.6.0 backup file
4. tail -f /var/log/messages
but nothing messages like "Restore has done".
5. Wait until you can login to the GUI.
This is the only restoration completion message.
6. ESM reboot.
7. ERC/ACE restore
8. Wait about 15 minutes.
9. ERC/ACE reboot.