cancel
Showing results for 
Search instead for 
Did you mean: 
Macnica_koba
Not applicable
Report Inappropriate Content
Message 1 of 4

Incorrect display of Running Tasks when Deploying to FailOver Pair (Primary Sensor Down etc)

If Deploy Pending Changes (Configuration Update) is executed while the primary sensor of the FailOver configuration is down, naturally the setting change to the Primary sensor will fail.
However, "Running Tasks" showing the result of various tasks will show "Successfull".
Although McAfee Corporation insists that the above is a product specification, it acknowledges that it is inconvenient.

To prevent users from misrecognizing, please fix Bug # 1247430 above.

3 Replies
Reliable Contributor mjesmer
Reliable Contributor
Report Inappropriate Content
Message 2 of 4

Re: Incorrect display of Running Tasks when Deploying to FailOver Pair (Primary Sensor Down etc)

Is this with 2 Non FO model sensors in a pair or with 1 FO model in the pair?

 

Also both devices should fail the update if the primary device is down. Since they need to be running the same confirguration to be in a Pair.

Macnica_koba
Not applicable
Report Inappropriate Content
Message 3 of 4

Re: Incorrect display of Running Tasks when Deploying to FailOver Pair (Primary Sensor Down etc)

 1 FO model in the pair.

The following specifications you say are old.

>Also both devices should fail the update if the primary device is down. Since they need to be running the >same confirguration to be in a Pair.


It certainly worked with previous versions.
On 9.1 series, even if the Primary senosor is shut down, Deploy will succeed for the FO.
McAfee also acknowledges this.

Highlighted
Reliable Contributor mjesmer
Reliable Contributor
Report Inappropriate Content
Message 4 of 4

Re: Incorrect display of Running Tasks when Deploying to FailOver Pair (Primary Sensor Down etc)

Good to know that this has been changed.

Apologies for the out of date info.

McAfee ePO Support Center Plug-in
Check out the new McAfee ePO Support Center. Simply access the ePO Software Manager and follow the instructions in the Product Guide for the most commonly used utilities, top known issues announcements, search the knowledgebase for product documentation, and server status and statistics – all from within ePO.