cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted

S2008 Capabilities?

I would like some input on the capabilities of the S2008 MFE v8.3.0  The current plan is to have our internal network attached to EM1.  EM1 will have multiple IP's to account for our multiple subnets.  Our Subnets would be something like this example:

        Subnet                              Firewall Interface IP                    Description

192.168.0.0/24                             192.168.0.1                             Administration (Switches, etc.)

192.168.0.1/24                             192.168.0.2                             Servers

192.168.0.2/24                             192.168.0.3                             Business Computers

192.168.0.3/24                             192.168.0.4                             Printers & Scanners

192.168.0.4/24                             192.168.0.5                             Test Equipment

192.168.0.5/24                             192.168.0.6                             WLAN

192.168.0.6/24                             192.168.0.7                             Video Cameras

192.168.0.7/24                             192.168.0.8                             Future Use

Currently the network only has a few L2 "dumb" switches.  I have figured out how to do packet forwarding between the different subnets on EM1 via the firewall, thanks to a lot of help here.  But I am concerned about if the firewall can handle that much traffic on the interface.  Basically all traffic will arrive at EM1 and then be routed to the appropriate subnet or out to the WAN.  So anytime a business computer needs to access a server or printer it would do so through the firewall interface instead of directly through the switches.  The immediate benefit I see to this is being able to scan data going to the servers for viruses etc.  Can anyone tell me if the firewall can handle this traffic load or will it slow down everything?  What would be the best recommendation?

4 Replies
Highlighted
Level 13
Report Inappropriate Content
Message 2 of 5

Re: S2008 Capabilities?

Hello,

The main thing that I think you should be concerned with is not how many subnets there are, but instead how many clients and how much traffic they pass. As you mention, virus scanning is also an option, but will cause more load on the firewall.

Here is a link to a document that shows the recommended number of users that you should have for a S2008 (300 users). It is not to say that it cannot handle more than that. Please also take a look at the "Performance" section of that page.

Finally, I recommend that you contact sales as they are going to be able to help you size the correct appliance for your network.

-Matt

Highlighted

Re: S2008 Capabilities?

I do not see the link in your post that you refer to.  Our office is only about 35 people at the moment but will be growing.  I do not see us getting to 300 users or even close to that anytime in the foreseeable future.  My biggest concern was all of the traffic and routing happening on a single interface port.  Is that too much traffic for a single port to handle or do we need to buy routers and all that?

Level 13
Report Inappropriate Content
Message 4 of 5

Re: S2008 Capabilities?

For some reason it seems like my link was removed, I'll try it again:

http://www.mcafee.com/us/products/firewall-enterprise.aspx#vt=vtab-Requirements

I think that the port should be just fine with only 35 users. They are gigabit interfaces, do you know what speed your switches are?

-Matt

Highlighted

Re: S2008 Capabilities?

Thanks for the link.  All of the switches are 1Gb.

You Deserve an Award
Don't forget, when your helpful posts earn a kudos or get accepted as a solution you can unlock perks and badges. Those aren't the only badges, either. How many can you collect? Click here to learn more.

Community Help Hub

    New to the forums or need help finding your way around the forums? There's a whole hub of community resources to help you.

  • Find Forum FAQs
  • Learn How to Earn Badges
  • Ask for Help
Go to Community Help

Join the Community

    Thousands of customers use the McAfee Community for peer-to-peer and expert product support. Enjoy these benefits with a free membership:

  • Get helpful solutions from McAfee experts.
  • Stay connected to product conversations that matter to you.
  • Participate in product groups led by McAfee employees.
Join the Community
Join the Community