It appeared that right after I Enable Firewall Rules in HIPS , we can't RDP to our servers anymore. If we turn the Firewall rules off then it working just fine. I created Firewall rules to allow RDP in HIPS Firewall rules but that did not seem to work. What I did was just add new rules in Firewall then at Protocol I selected " RDP" I did not really adding any specific IPs or anything like that. I am wondering if there is a specific way to create this RDP rule to make it to work? Will appreciate any inputs. Thank you !
Hi @Former Member
The default RDP port is 3389. You can create 2 HIPS rule for RDP.
1) Allow Inbound RDP
Direction - IN
Transport Protocol - TCP
Local Port - 3389
2) Allow outbound RDP
Direction - Out
Transport Protocol - TCP
Remote Port - 3389
I hope this helps.
Thanks
Was my reply helpful?
If you find this post useful, Please give it a Kudos! Also, Please don't forget to select "Accept as a solution" if this reply resolves your query!
Hello I dont think I have any options like that for port 3389 to fill in. I believe the one you mention is ENS firewall. The one that I use is HIPS firewall rules. Please see my attached of what available to me. Thank you!
Hi @Former Member Please see the KB article below for details about this.
KB74021 - Endpoint Security/Host Intrusion Prevention firewall rules differ for Reliable Data Protocol and Microsoft Remote Desktop
https://kc.mcafee.com/corporate/index?page=content&id=KB74021
Corporate Headquarters
6220 America Center Drive
San Jose, CA 95002 USA