kindly how can we configure servers as primary and secondary servers, it is not mentioned in the documents?
and when i do in protection manager the configuration type as reference, and adding the server ips and name it gives me a message "authentication failed,local and reference server are not cross certified"
It is checking for usage of domino replication - cross certification error is suggesting this is not possible as the servers are not trusted.
Standard replication port is 1352 (if I remember correctly)
(reference is dependent on Domino Replication of <dominodata>\McAfee\mcafeeconfig.nsf from your primary server to same nsf on other server(s)).
The authentication error is not exist anymore. The sys admin solve it and we creat a replica task for mcafeeconfig.nsf and the port is open, but the configs are not pushed to secondary yet.
Any other thoughts??
Hopefully you don't have ePO management "and" trying this?? If its receiving ePO policy - this overrides.
But when you make a change on primary in msdw config and click apply.
e.g. make a change to something obvious - Settings & Diags - Server Specific Settings - Mail Notifications
For test purposes make notification Sender something like ReplicationTest@yourdomain.com
Within 2 to 3 mins - this should be reflected in local mcafeeconfig.nsf (you can open this in Dom Admin or Notes)
You can see the mcafeeconfig.xml - open it in Browser and search for "ReplicationTest" you will see detail and its location
On this is in place on Primary - do your push replication or command - and check domino console or logs for errors.
If replication push was successful go to Secondary server again open the mcafeeconfig.nsf - look at the mcafeeconfig.xml
It would clarify if replication was actually successful if the mcafeeconfig on secondary server has the ReplicationTest@yourdomain.com.
If it does within a 2 to 3 mins this should be replicated to the config you open - don't leave it open - close and reopen to check changes.
I did the test you recommended before.
And i checked the mcafeeconfig.nsf on the secondary server and the changes is wrotten on the database. But still in the interface did not catch the changes