I want some help with this issue , im trying to block SD cards on laptos , how i can doit
already try with , Portable media device , mass storege , and am using dlp 9.3
Thanks for your answer,
i try with the compatible ID but it doest work, mmm my sd card shows a diferent Compatible id wpdbusenum\fs
i alredy try withis but its the same case , still showing the SD card
any other idea my friend ?
In my environment, I have seen some things like Micro SD cards in an adapter mount as USB storage....I think this is because the SD port is wired into the internal USB hub on the motherboard.
Can you grab and excerpt out of your setupapi.dev.log file to show what is being detected.
It looks like it is coming in as a Windows Portable Device...but this may be the SD card reader you are seeing and not the card itself.
And that may actually be a good option to just block the reader itself.
Hi, Thanks for your answers,
Thanks it could be a partial solution i going to try it
Well i try with the id, and the log , actually McAfee read the SD card as Windows Portable Device but unfortunately,
the McAfee shows up saying thtat windows portable device has bee block but secons later the users are able to use the SD card
what i didn't try is blocking the Hub Ports, i gonna do it today and i going to let you know if it works , becasue actually alll the policys that i tryed faield , mmm even with the ID GUI, Compatible ID
Thanks again for the follow up
Use the File System Access Type parameter in the Removable Storage Device Definition. Choose Read-Write.
Understand that this will trigger the rule for any device that identifies itself to the OS as capable of Read and Write including CD/DVDs (MTP is not Removable Storage and will not trigger based on this parameter)
"Understand that this will trigger the rule for any device that identifies itself to the OS as capable of Read and Write including CD/DVDs (MTP is not Removable Storage and will not trigger based on this parameter)"
Yes BUT then how will you knopw WHO tried or it was JUST a refresh of the OS or Power Standby.
Lets say you are in monitoring Project mode where you want to know what employee us all over?