Showing results for 
Search instead for 
Did you mean: 
Level 7

DLP Monitor web page not working


i have a DELL power edge server with esxi 5.5 installed.

the DLP manager 9.3.1 installed and work fine with EPO 4.6.7, but after install the dlp monitor i cant access to the web page and the service stingray is down.

/sbin/sysctl -p /data/stingray/etc/sys_ctl

net.ipv4.tcp_window_scaling = 0

net.ipv4.tcp_timestamps = 0

net.ipv4.conf.all.send_redirects = 0

net.ipv4.conf.all.secure_redirects = 0

net.ipv4.conf.all.accept_redirects = 0

net.ipv4.conf.default.accept_redirects = 0

net.ipv4.conf.default.secure_redirects = 0

net.ipv4.conf.default.send_redirects = 0

net.ipv4.conf.eth1.send_redirects = 0

net.ipv4.conf.eth1.secure_redirects = 0

net.ipv4.conf.eth1.accept_redirects = 0

/usr/bin/ipcs -m >/data/stingray/tmp/shm_destroy.6646

master(): /data/stingray/bin/shm_destroy

stingray IPC is destroyed

current stingray state = STOP

setting state = DESTROY

current stingray state = DESTROY

/etc/init.d/stingray[253]: _start: line 124: 6651: Abort(coredump)

current stingray state = DESTROY

[start] requires current state to be INIT

any one know how to fix this ????

0 Kudos
1 Reply
Level 12

Re: DLP Monitor web page not working

Check in the following files for an error:



If the Manager worked but a Monitor isn't, it's possible that the secondary partition for the RFS isn't being seen.  It will throw an error stating /dev/sdb1 or /dev/sdb2 cannot be found.  A Manager will function without it, but the other platforms require it.

0 Kudos