I need help with blocking builtin card reader (pci bus) in Lenovo T440/450. Some environment info : EPO 5.3.1, DLP 9.3.400.60.
I tried many options suggested at the forum and in MCAFEE's Kb's but none of them worked.
Already tried the following: Using Device compatible ID, Device Instance ID, Device Name, PCI vendor ID/Device ID.
From all this only Device Instance ID blocked the following (but SD was still accessible):
Device Class GUID:
Device Class Name:
Device Compatible ID:
Device Instance ID:
Have anyone succeeded in blocking something similar to this?
Some trouble shooting steps:
how you blocking the devices based on user or based on system if you blocking based on system check whether the rule is applied or not,
if you are blocking based on user check whether user is included or excluded.
First this will be no easy tasks. The cheapest solution is to hire a person to UNPLUG the USB Card reader cable (Clean inside 😉 OR if you are in a BANK UNPLUG and CUT it so employee don't self attach again inside PC.
We did this under DLP 9.3 with HP MEDIACARD22in1 etc. in DESKTOP and it was horror.
The only working solution was to:
* Install a software like devmgr where you see all componentens from USB and hubs
* Then "No Joke" 1) Put a MEDIA (SD-card) into the SLOT 2) On the mainboard itself UNPLUG and then PLUG the Media card reader USB-cable. (Physical open box)
* ONLY then you the right events and DeviceID's
Try anything else > You think it's working but fail....
We spent almost 1 month on debug on this because a larger customer who promised to disable the Media card Readers physical did NOT. Worst case they have Bitlocker/TPM so we
now can't JUST unpluf the cable wihtout changing bitlocker configs.
You may have to solve this with Laptop Card Readers but there the effort will be ok.
a Mcafee TIE fan
I did a presentation on DLP configuration a while ago and just posted it.
Maybe you will have some tips there...I know the Ricoh SD card reader POSTS frequently giving a large number of false-positives.
Also..some SD card readers are wired into the internal USB Hub...so they mount as USB....
then there are cameras
We used Compatible ID's to get them.
This ia how to block all sorts of SD card irrespective of type/model. Please check this post (https://community.mcafee.com/t5/Data-Loss-Prevention-DLP/Cannot-block-SD-cards-using-built-in-mcafee... ) or read full details below.
You cannot block SD card with built-in definition. This is what you need to do
New Definition/Rule Set for SD Card RO/BLOCK or whatever you choose
Create new Definitions under Removale Devices or duplicate "SD Card readers (windows) [built-in]" definitions
Rename or name as "SD Card RO or BLOCK"
Click edit and select Device Instance ID (Advanced)
Create 3 Comparisons with "Contain" and "Value" SD/RIMMPTSK/PCISTOR
Now go to DLP Rule Set
Under Rule Sets
Create new rule, fill all your requirements then under Removable Storage click to select newly created "SD Card RO/BLOCK" definitions
OK and save
Assign to a policy and send WAU and you should be fine
Any issue please post back error or output result